|
|
The Agilent WireScope 350 cable tester provides high performance permanent link and channel test probes for UTP, STP, ScTP or coax copper cabling. The Fiber SmartProbes provide certification testing of both multimode and single mode fiber cables while also providing low cost optical power meter and light source functionalities. A bright color touch screen simplifies navigation through menus and improves comprehension of test result data, resulting in faster operation and reduced training times. Setup instruction screens assist the operator when configuring test options, minimizing the chances of inadvertently testing to the wrong limits. All settings can be defined on a PC and downloaded in a single operation, speeding the process of configuring multiple WireScope 350 sets for the same job site testing requirements. Test Parameters; Supported frequency range: 1 to 350 MHz. Accuracy: TIA Level III accuracy. Supported Tests; Near End Crosstalk (NEXT): results displayed in pair to pair and/or PowerSum format. Attenuation (Insertion Loss). Equal Level Far End Crosstalk (ELFEXT). Return Loss. Ambient Noise: plots noise versus frequency. Wire Map: identifies miswires, shorts, opens, reversals and split pairs. Detects shield continuity. Cable Length: measures length of each pair and distance to faults. Propagation Delay: reports total delay and delay skew between pairs. Loop Resistance. Test Standards; TIA/EIA-606-A and TIA/EIA-568-B Cat 3 through 6. ISO/IEC 11801 Class C, D and E. EN 50173 Class C, D and E. Australia/NZ Class C, D and E. TIA 606a. UTP, STP, SCTP, COAX and Twinax cabling. IEEE 802.310BASE-T, 100BASE-TX, 1000BASE-T. IEEE 802.5 Token ring and IBM Type 1. UTP and fiber PMD interfaces.
|